RT 4.4.2 installation on CentOS 7.4.1708
NOTE: Original Document was for CentOS 7.2 and RT 4.4.1 with MySQL. Updated for CentOS 7.5, RT 4.4.2 with PostgreSQL.
CAUTION: While this document has been upgraded for CentOS 7.5, you cannot use this method to install RT 4.4.3 directly - there is an issue with the web install on RT 4.4.3. I've asked Best Practical to look at the issue. It would appear that the PGP key for RT-4.4.3 is not certified, and the web install fails during attempts to follow the method below. I can confirm an upgrade to RT 4.4.3 is possible after following this install, but with the PGP key issue, I do not recommend the upgrade until Best Practical resolved the issue.
This document provides a quick methodology for installing RT 4.4.2 on CentOS/RHEL 7.5 for an internet-connected server. There is a separate CentOS 6.x install at https://rt-wiki.bestpractical.com/wiki/CentOS6Install.
* Access to the internet and CentOS OS and update repositories is available. * Installation testing was completed using CentOS 7.5.1804 minimal boot ISO. * httpd (Apache) 2.4 and mod_fcgid Apache modules were used as the host environment. * Testing was conducted in both KVM and vSphere environments. * Note that the EPEL repository is not required for installation on CentOS 7.
- OS Installation and Initial Configuration
* (!) It is possible to automate the majority of this section using kickstart files.
- Install OS.
* Install the OS from ISO or PXE boot using your normal methodology.
- Install prerequisites for RT from OS repository.
yum install expat gd graphviz openssl expat-devel gd-devel graphviz-devel openssl-devel perl perl-CPAN wget screen mod_fcgid postgresql-server postgresql-devel yum groupinstall "Development Tools" "Web Server"
* NOTE: We use PostgreSQL as the DB which allows us to enable full text search. (This is a change from the previous version of the document which used MySQL/MariaDB.)
- Patch OS
- Disable selinux, by editing /etc/sysconfig/selinux:
* reboot the OS
- Initialize the database:
- Adjust local services:
systemctl enable postgresql.service systemctl enable httpd.service systemctl start postgresql.service systemctl stop httpd.service
* NOTE: httpd service needs to be stopped to allow RT web based configuration later.
- Configure Supporting Software
- Configure postgres user password for postgresql, where 'xxx' is the 'password':
sudo -u postgres psql ALTER USER postgres PASSWORD 'xxx'; \q
* NOTE: This step configures the internal DB postgres password for the local instance of postgresql
- Reconfigure postgres local user access
Configure PostgreSQL to use md5 passwords (needed for RT). Edit /var/lib/pgsql/data/pg_hba.conf and modify the following line from peer to md5:
# "local" is for Unix domain socket connections only #local all all ident local all all md5
- Restart postgres server
systemctl restart postgresql.service
- Install CPAN minus.
curl -L http://cpanmin.us | perl - --sudo App::cpanminus
- RT Dependencies and Installation
- Get RT
mkdir rt cd rt wget https://download.bestpractical.com/pub/rt/release/rt-4.4.2.tar.gz wget https://download.bestpractical.com/pub/rt/release/rt-4.4.2.tar.gz.asc
- Verify downloads
* NOTE: Release notes are found at https://bestpractical.com/release-notes/rt/4.4.2 * extract the sha256sums from the release notes online and add them to a new sha256sum.txt file.
b2e366e18c8cb1dfd5bc6c46c116fd28cfa690a368b13fbf3131b21a0b9bbe68 rt-4.4.2.tar.gz 2185c2be31b352ad0a7605f9a4e4720b2c3607df75aae1c0cbace9eb9e6fcef8 rt-4.4.2.tar.gz.asc
* confirm the files:
sha256sum -c sha256sum.txt
* Confirm the GPG key signatures
gpg rt-4.4.2.tar.gz.asc gpg --keyserver pgpkeys.mit.edu --recv-key XXX gpg rt-4.4.2.tar.gz.asc
* NOTE: identify the RSA key ID from the first and replace XXX with the key (RSA key ID 31440520 as of 12 Apr 18)
- Extract the files
tar xvzf rt-4.4.2.tar.gz -C /tmp cd /tmp/rt-4.4.2
- Configure RT:
./configure --enable-graphviz --enable-gd --with-web-user=apache --with-web-group=apache --with-db-type=Pg
- Configure RT to use cpanm for fixdeps:
- Test the dependencies:
- Install the dependencies:
* NOTE: You may need to run the command more than once.
- Confirm dependencies:
- Install RT (default install is to the /opt/rt4 directory):
- RT Configuration using Web Interface
* (!) It is possible to complete this step by editing the RT files directly, and creating the database. Refer to the RT documentation for manual steps.
- Configure firewalld to open port 80
firewall-cmd --zone=public --add-port=80/tcp --permanent firewall-cmd --reload
* Note: This is an example only, which provides full access to the http port.. Configure your firewall as per site policies.
- Start the first run installation instance:
- Configure using the web interface.
* Access the server using a web browser to access the http port. * Configure the RT instance using the web interface. Refer to the RT documentation.
- Shutdown the rt-server instance.
* When completed Ctrl-C the rt-server instance started above.
- Configure web server
- Modify /etc/httpd/conf.d/fcgid.conf. Add:
- Create /etc/httpd/conf.d/rt.conf:
# RT4 configuration for Apache # # With minor changes, this configuration is based on the original documentation: # https://docs.bestpractical.com/rt/4.4.2/web_deployment.html # ### Optional apache logs for RT # Ensure that your log rotation scripts know about these files # ErrorLog /opt/rt4/var/log/apache2.error # TransferLog /opt/rt4/var/log/apache2.access # LogLevel debug AddDefaultCharset UTF-8 ScriptAlias / /opt/rt4/sbin/rt-server.fcgi/ DocumentRoot "/opt/rt4/share/html" <Location /> # For Centos7/Apache 2.4 use this line: Require all granted # For Centos6/Apache 2.2 use these two lines: # Order allow,deny # Allow from all Options +ExecCGI AddHandler fcgid-script fcgi </Location>
- Start apache:
systemctl start httpd.service
- Further RT Customization
* These steps are not mandatory, and can be skipped if not desired.
- Enable Full Text Indexing
* This command modifies the database to enable full text indexing * Run:
/opt/rt4/sbin/rt-setup-fulltext-index --no-attachments --dba-password XXX
* NOTE: XXX is the postgres DB user password * DB Table: AttachmentsIndex * Column Name: ContentIndex * Index: GIN * As the last command will leave the postgres DB password in the command history, clear the relevant history record:
history history -d <number>
reflects the line number with the --dba-password statement
- Prepare for Offline Attachments
* This enables the migration of embedded attachments from the database to a local filesystem * Create the directory to store attached files
- Modify Site Configuration for fulltext indexing and offline attachments
/opt/rt4/etc/RT_SiteConfig.pm, inserting the following above the final
# enable FullTextSearch Set( %FullTextSearch, Enable => 1, Indexed => 1, Column => 'ContentIndex', Table => 'AttachmentsIndex', ); # enable external file storage Set(%ExternalStorage, Type => 'Disk', Path => '/opt/rt4-atts', );
- Create RT crontab entry
* * Create
# Request Tracker cron.d/rt file # For details see man 3 crontabs # Example of job definition: # .---------------- minute (0 - 59) # | .------------- hour (0 - 23) # | | .---------- day of month (1 - 31) # | | | .------- month (1 - 12) OR jan,feb,mar,apr ... # | | | | .---- day of week (0 - 6) (Sunday=0 or 7) OR sun,mon,tue,wed,thu,fri,sat # | | | | | # * * * * * user-name command to be executed # Request Tracker crontab entries # attachments - daily moving of large attachments from DB to file system 0 0 * * * root /opt/rt4/sbin/rt-externalize-attachments # indexer - daily indexing of db for fulltext search 0 0 * * * root /opt/rt4/sbin/rt-fulltext-indexer --quiet # email digests - RT4 email digest processes 0 0 * * * root /opt/rt4/sbin/rt-email-digest -m daily 0 0 * * 0 root /opt/rt4/sbin/rt-email-digest -m weekly 0 * * * * root /opt/rt4/sbin/rt-email-dashboards # clean sessions - once a day blow away any open sessions 0 0 * * * root /opt/rt4/sbin/rt-clean-sessions 6H
- Installation Complete
- Reboot server to confirm service restart
* It is recommended that you reboot the server to confirm all services restart and provide RT.
- Access RT
* Connect to RT using your web browser and start your site customization.