Difference between revisions of "CentOS6Install"

From Request Tracker Wiki
Jump to navigation Jump to search
Line 23: Line 23:
## Patch OS
## Patch OS
<pre>yum update</pre>
<pre>yum update</pre>
* Reboot the OS.
* If you are continuing to next step immediately, you do not need to reboot.
## Disable selinux, by editing /etc/sysconfig/selinux:
## Disable selinux, by editing /etc/sysconfig/selinux:
## Reboot the OS
  * reboot the OS
  * reboot the OS
## Initialize the database:
## Initialize the database:

Revision as of 10:55, 1 April 2018

RT 4.4.2 installation on CentOS 6.9

NOTE: Cloned from original document for CentOS 7 install.

This document provides a quick methodology for installing RT 4.4.2 on CentOS/RHEL 6.9 for an internet-connected server.

  1. Assumptions
* Access to the internet and CentOS OS, update and EPEL repositories is available.
* Installation testing was completed using CentOS 6.9 minimal boot ISO.
* httpd (Apache) 2.2 and mod_fcgid Apache modules were used as the host environment.
* mod_fcgid requires enabling the EPEL repository
* Testing was conducted in both KVM and vSphere environments.
  1. OS Installation and Initial Configuration
* (!) It is possible to automate the majority of this section using kickstart files.
    1. Install OS.
* Install the OS from ISO or PXE boot using your normal methodology.
    1. Install prerequisites for RT from OS repository.
yum install epel-release
yum install expat gd graphviz openssl expat-devel gd-devel graphviz-devel  openssl-devel perl perl-CPAN wget screen mod_fcgid postgresql-server postgresql-devel
yum groupinstall "Development Tools" "Web Server"
* NOTES:  We use PostgreSQL as the DB which allows us to enable full text search.  We need to enable the EPEL repository to install mod_fcgid on CentOS 6.
    1. Patch OS
yum update
    1. Disable selinux, by editing /etc/sysconfig/selinux:


    1. Reboot the OS
* reboot the OS
    1. Initialize the database:
service postgresql initdb
    1. Adjust local services:
chkconfig postgresql on
chkconfig httpd on
service postgresql start
service httpd stop
* NOTE:  httpd service needs to be stopped to allow RT web based configuration later.
  1. Configure Supporting Software
    1. Configure postgres user password for postgresql:
sudo -u postgres psql
  ALTER USER postgres PASSWORD 'xxx';
* NOTE:  This step configures the internal DB postgres password for the local instance of postgresql
    1. Reconfigure postgres local user access

Configure PostgreSQL to use md5 passwords (needed for RT). Edit /var/lib/pgsql/data/pg_hba.conf and modify the following line from peer to md5: local all all md5

    1. Install CPAN minus.
curl -L http://cpanmin.us | perl - --sudo App::cpanminus
  1. RT Dependencies and Installation
    1. Get RT and extract to /tmp.
wget https://download.bestpractical.com/pub/rt/release/rt-4.4.2.tar.gz
tar xvzf rt-4.4.2.tar.gz -C /tmp
cd /tmp/rt-4.4.2
    1. Configure RT:
./configure --enable-graphviz --enable-gd --with-web-user=apache --with-web-group=apache --with-db-type=Pg
    1. Configure RT to use cpanm for fixdeps:
export RT_FIX_DEPS_CMD=/usr/local/bin/cpanm
    1. Test the dependencies:
make testdeps
    1. Install the dependencies:
make fixdeps
* NOTE:  You may need to run the command more than once.  On RHEL/CentOS 6.9, you may need to manually force the addition of some perl module via cpanm Module::SubModule --force.
    1. Confirm dependencies:
make testdeps
    1. Install RT (default install is to the /opt/rt4 directory):
 make install
  1. RT Configuration using Web Interface
* (!) It is possible to complete this step by editing the RT files directly, and creating the database.  Refer to the RT documentation for manual steps.
    1. Start the first run installation instance:
    1. Configure using the web interface.
* Access the server using a web browser to access the http port.
* Configure the RT instance using the web interface.  Refer to the RT documentation.
* NOTE:  You will likely need to disable your firewall or open port 80.  service iptables stop will disable the firewall temporarily.
    1. Shutdown the rt-server instance.
* When completed Ctrl-C the rt-server instance started above.
  1. Configure RT:
* Modify RT to allow web access using a trailing /rt
* (!) This is a personal preference.  The web server example in the next section assumes /rt is used.
    1. Modify /opt/rt4/etc/RT_SiteConfig.pm. Add the following line:

Set( $WebPath, '/rt' );

  1. Configure web server
    1. Modify /etc/httpd/conf.d/fcgid.conf. Add:

FcgidMaxRequestLen 1073741824

    1. Create /etc/httpd/conf.d/rt.conf:
# RT4 configuration for Apache
### Optional apache logs for RT
# Ensure that your log rotation scripts know about these files
# ErrorLog /opt/rt4/var/log/apache2.error
# TransferLog /opt/rt4/var/log/apache2.access
# LogLevel debug

AddDefaultCharset UTF-8

Alias /rt/NoAuth/images /opt/rt4/share/html/NoAuth/images/

ScriptAlias /rt /opt/rt4/sbin/rt-server.fcgi/

DocumentRoot "/opt/rt4/share/html"

<Location /rt>
  # For Centos7/Apache 2.4 this line:
  Require all granted
  # For Centos6/Apache 2.2 these two lines:
  # Order allow,deny
  # Allow from all
  Options +ExecCGI
  AddHandler fcgid-script fcgi
    1. Start apache:
service httpd start
    1. Modify iptables
* Complete your iptables configuration to suite your local requirements.
* To open the firewall for port 80, edit the /etc/sysconfig/iptables file and add the following line:
insert sample line here
    1. Reboot
* conduct a reboot to confirm the web server restarts and enable provides access to RT.
  1. Installation Complete
    1. Access RT
* Connect to RT using your web browser, login using the root user and start your site customization.